5
English
Reconnection in the event of Bluetooth disconnection
If for any reason the Bluetooth connection between your device and the speaker is
broken, such as when the devices are out of range of each other or have been swit-
ched off, the connection will be re-established automatically once the fault has been
rectified. It takes about 20 seconds.
If you wish to disconnect the speaker once it has been paired, press the [ /
►
II ] button.
Playback from external device via Bluetooth
• Volume: Use the volume buttons on the top of the speaker to raise or lower
the volume.
• Pause: Press [ /
►
II ] to pause playback. Press it again to resume playback.
• Previous/Next track: press [ I
◄◄
/V− ] to play the previous track or [
►►
I/V+ ]
to play the next track.
Playback from external device via line-in
An external device can be connected using the included 3.5 mm cable.
1. Plug the external device into the 3.5 mm AUX IN socket on the side of the speaker.
2. Lower the volume and start playback on the external device.
3. Adjust the volume both on the device and speaker to achieve the desired volume level.
Power bank
The speaker’s USB port can be used as a charge port to charge external devices.
The port may be used to charge iPhones, iPads, most Android phone models, digital
camera, etc. Max output current: 1000mA.
* Certain Android phones require a specially connected charger.
1. Set the [ ON/OFF ] switch to
ON
.
2. Connect the external device to the USB port using a USB sync/charging cable
(sold separately).
3. Press and hold in [ ] for 3–4 seconds to start charging your device.
Charging the speaker
• Plug the Micro USB end of the charging cable into the Micro USB port on
the speaker. Plug the other end of the charging cable into the USB port of
a computer or other device capable of charging the speaker.
• The charging indicator on the speaker will flash during charging and shine
steadily when the speaker is fully charged.
• It takes about four hours to charge the speaker from a flat battery. The first few
times the battery is charged may require up to twelve hours of charging.
Care and maintenance
• Clean the speakers using a lightly moistened cloth. Never use solvents or corrosive
cleaning products.
