6
English
• Remove the watch strap from the watch and wash the strap in
the basket if the watch has a lower rating than 10 ATM/100 m.
• In order to be able to use the included watch stand which holds
the watch above the water, the watch casing must be water resistant
to at least 10 ATM/100 m.
• The ultrasonic waves might cause water to penetrate the casing of
watches with lower water resistance despite them being held above
the surface of the water.
• Never immerse a watch movement in the water, regardless of its
water resistance rating.
• Make sure that any buttons on the watch are pushed in and that
all the seals are in good condition before placing the watch onto
the holder.
10ATM/100m
<10ATM/100m
2. Up to two CDs/DVDs can be cleaned at the same time by
placing them onto the included CD stand separated by
the spacer.
3. Fill the tank with water, making sure that the water level does not rise
above the maximum water level mark. A few drops of washing-up
liquid can be added to the water if necessary.
4. Close the lid and plug the appliance into an electrical socket. “180”
will appear on the display. This is the default cleaning time setting.
Press [ ON ] to switch the appliance on, or press [ SET ] to select
another timer setting and then [ ON ] to switch the appliance on.
The appliance will emit a humming sound when it is switched
on and maybe even a little smoke. The water may become cloudy.
This is completely normal.
5. The cleaning process stops automatically when the timer has
counted down to zero. The cleaning process can be interrupted at
any time by pressing the [ OFF ] button.
6. When you have finished cleaning the items, unplug the appliance,
open the lid and remove the items.
7. Empty the tank by pouring the water out in the direction indicated in
the picture. Dry the inside of the tank. The tank should be cleaned
and fresh water should be used each time.
