7
E
n
g
li
s
h
5. Fitting aluminium rings and wall supports to
the TV set
Warning!
• Avoid laying the TV set down with the screen facing downwards. If it is absolutely
necessary to do this, lay the TV set on a blanket or similar to protect the screen.
• Never tilt a plasma TV more than the amount recommended in the instruction manual.
• Insert the bolts by hand first. Stop immediately if you feel resistance.
Remove the bolt and find out what is wrong.
1. Check the back of the TV set. If the back is flat, you can use the shorter bolts.
If the back is curved, use the longer bolts together with the spacers (8 or J).
Use some of the bolts* supplied to secure the aluminium rings (2) to
the back of the TV set.
2. Bolt the wall support (3) into the lower bolt holes of the TV set.
3. Check that there is space for the cable connections on the TV set and that
the cables are not bent too much when mounting the TV set on the bracket.
*
Note:
Several types of bolt are supplied, since different makes of TV set have different
fixings. If you are uncertain, check the instruction manual for the TV set. This usually
states maximum and minimum lengths for the bolts.
Installation examples
Flat back
with M4 use
A
I
2
3
with M5 use
B
I
2
3
with M6 use
C
2
3
with M8 use
D
2
3
Curved back
with M4 use
4
I
8
2
3
with M4 use
E
I
J
2
3
with M5 use
5
I
8
2
3
with M5 use
F
I
J
2
3
with M6 use
6
8
2
3
with M6 use
G
J
2
3
with M8 use
7
8
2
3
with M8 use
H
J
2
3
