4
E
n
g
li
s
h
Assembly
Note!
Make sure that the wall onto which you intend to mount the wall bracket can support the combined weight of
the TV, wall mount and fixings.
Mounting onto wooden studding
70 mm
Ø 3/16
″
(5 mm)
1. Remove the plastic covers (2)
from the wall mount (1).
2. Use the wall mount as a
template to mark out where
the four mounting holes are to
be drilled. Make sure that they
are in the centre of the studding
batten and are horizontal.
A stud detector can be used
to help locate the centre of
the batten.
3. Use a 5 mm drill bit to make
the holes 80 mm deep.
UP
4. Attach the mount to
the batten using the anchor
screws (I) and washers (K).
Screw on securely,
but do not overtighten.
Mounting onto a masonry wall
1. Remove the plastic covers (2) from the wall mount (1).
2. Use the wall mount as a template and mark out where
the four holes are to be drilled. Make sure that the
mount is horizontal and that the wall is flat and solid.
3. Use a 10 mm drill bit to make the holes 80 mm deep.
UP
4. Insert the wall plugs (J) into the holes and secure
the mount using the screws (I) and washers (K).
Screw on securely, but do not overtighten.
5. Push the plastic covers back over the fastening
points.
70 mm
Ø 3/8
″
(10 mm)
