5
E
N
G
LI
S
H
5. Pre-drill if necessary, for example using a 6 mm drill bit using the markings that
you have made.
6. Have someone help you hold the bracket when you insert the enclosed wood
screws (Q), together with the washers (R), into the holes that you have drilled.
7. Make sure that the screws are sufficiently tightened, but not so tight that they
might damage the wall. Before mounting the TV onto the bracket, check its
stability by carefully loading it with a weight similar to that of the TV.
Mounting on a concrete wall
Please Note!
Make sure that the wall you are mounting the bracket on can hold the
total weight of both the TV and the bracket. If in doubt, contact an expert.
1. Choose a stable wall on which the bracket is to be mounted.
2. Position the wall bracket against the wall surface and adjust its angle. Use the
spirit level which is installed on the bracket.
3. Make six markings for drill holes in the screw holes depending on the weight of
the TV.
4. Drill with a 10 mm concrete drill using the markings that you have made.
Important!
When mounting the wall bracket, the holes need to be drilled at least
as long as the screws being used!
5. Clean the holes of drill dust and fit the plugs (P) into the holes. Use a hammer to
drive the plugs all the way in.
6. Have someone help you hold the bracket as you insert the enclosed screws (Q),
together with the washers (R), into the holes.
7. Make sure that the screws are sufficiently tightened, but not so tight that they
might damage the wall. Before mounting the TV onto the bracket, check its
stability by carefully loading it with a similar weight to that of the TV.