E
N
G
LI
S
H
The mounting set contains:
(A) M4x12 Bolt (x4)
(B) M4x30 Bolt (x4)
(C) M4 Locking washer
(x4)
(D) M5x12 Bolt (x4)
(E) M5x30 Bolt (x4)
(F) M5 Locking washer (x4)
(G) M6x12 Bolt (x4)
(H) M6x35 Bolt (x4)
(I) M6 M5 Locking washer
(x4)
(J) M8x12 Bolt (x4)
(K) M8x40 Bolt (x4)
(L) M8 M5 Locking washer
(x4)
(M) Spacer ring small
(x4)
(N) Spacer ring, large
(x4)
(O) M6 Washer (x4)
(P) Plugs, 10 mm. (x6)
(Q) Wood screw, M8x60
(x6)
(R ) Washer, M6 (x6)
Mounting on a wooden wall
Please note!
Make sure that the wall that you are mounting the bracket onto can
hold the total weight of both the TV and the bracket. If in doubt, please contact an
expert.
1. Choose a stable wall on which the bracket is to be mounted.
2. Position the wall bracket over two wooden studs and use wood screws to screw
it into the studs. For other attachments on plaster walls, the plaster brace (not
enclosed) with screws must be used.
3. Position the wall bracket against the wall surface and adjust its angle. Use the
spirit level which is installed on the bracket.
4. Make four or more markings for drill holes in the screw holes depending on the
weight of the TV. If the TV is heavy, the bracket must be attached with several
bolts.
