E
N
G
LI
S
H
Use
Connecting the AC/DC adaptor
Connect the adaptor’s connector plug to the power input jack [ L ] on the back of
the speaker unit and then plug the adapter into the wall socket.
Inserting batteries
The speaker unit can run on batteries if you don’t want to or can’t use the
accompanying adaptor.
• Fold out the table stand [ H ], remove the battery cover and insert x
LR/AA batteries. Make sure that you align the batteries correctly, with the
negative poles (-) against the springs and the positive poles (+) against the
flat contacts
Inserting/Changing the remote control battery
Before you can use the
remote control, the protec-
tive plastic on the battery
needs to be removed.
• Remove the battery holder from the back of the
remote control by pushing in the catch on the
side of the remote at the same time as you pull
the battery holder outwards. Remove the pro-
tective plastic and replace the battery holder.
• To replace the battery, remove the battery
holder as instructed above and replace the
battery with a new CR0 battery. Make sure
to align the battery according to the marking on
the battery holder. The positive pole (+) should
be pointing downwards in the battery holder.
