Clas Ohlson 31-4985, Руководство пользователя

Страница: 10 / 56

10
E
n
g
li
s
h
Pump instructions
Never run the pump dry. The pump must be purged of any air before use by following
these steps:
1. Unscrew the air purge valve in the lid of the filter chamber and start the pump.
2. As soon as water comes out of the air purge valve, close the valve.
3. Wipe off any excess water from the pump housing.
Operation
1. As soon as the unit is switched on the display will show the current water
temperature.
2. The desired water temperature can be set by using and .
Set the desired temperature.
3. Lock the temperature adjustment controls by pressing and simultaneously
for 3 seconds. Unlock the controls in the same way.
4. Use button to switch between Celsius and Fahrenheit.
5. Press on the display to activate the air jets. Press the button again to turn
the air jets off.
6. Press to start the filter pump. The filter pump cannot be used at the same time
as the bubble massage function.
7. Press to activate both heating and filtration simultaneously. The pump will not
stop until the set temperature has been reached and it will automatically restart as
soon as the temperature drops by 2 °C.
Note:
• The massage function switches off automatically after 30 mins. Press the button
again to turn the air jets back on again.
• Pressing whilst in filtration mode will change filtration mode to massage mode.
Pressing the button again will revert the pump back to filtration mode.
• The heating and massage modes cannot be activated at the same time.