Clas Ohlson 18-8054, Руководство пользователя

Страница: 7 / 36

7
Pairing with adaptor.
1. Make sure that the headset is shut off. Then push for four to five
seconds until the light indicator changes over to alternating blue and red
blinking light. The headset is now in position for pairing
.
. Activate the mobile phone’s Bluetooth connection. See your mobile phone’s
operating instructions.
3. The mobile phone will now find the headset in the unit list. Mark the headset
in the list and choose to connect to it.
4. When you are asked to indicate PIN code, indicate “0000” to complete
pairing. The light indicator blinks with blue light and the headset is now in
standby position.
5. In certain circumstances in this position you might need to restore a
connection between the headset and the mobile phone. See your mobile
phone’s operating instructions.
Note!
-
If the headset is not in position for pairing the mobile phone can not localize
the headset. Carefully check that the headset is in position for pairing before
you begin the connection.
- If the units have not restored any connection within one minute stop the
pairing process. Repeat the procedure.
E
N
G
LI
S
H