4
English
I
0
Charging
Charge the battery fully before using the clipper for
the first time. Full charge is achieved after about 16 hours.
• Plug the mains adaptor plug into a wall socket and then
into the clipper’s charge socket.
• The charge indicator will show red while charging.
• A fully charged battery will give about 50 min of usage.
• The LED indicator will show green when the clipper is
fully charged.
• Full charge is achieved after about 9 hours.
You can also use the clipper without going through the entire
charging process:
1. Connect the mains adaptor to a wall socket.
2. Connect the mains lead to the clipper.
3. Remember to recharge the battery after use.
4. Do not use the clipper for more than one hour with
the mains lead connected.
Note:
Battery life will be shortened if the clipper is used directly from the mains too often. Make a habit of charging
the battery and using the clipper without the mains lead connected.
Clipping
Note:
The cutter blade is very sharp. Be careful when using the clipper without
the guide combs.
• Start the clipper by sliding the [ I/0 ] switch to the
I
position.
• Turn off the clipper by sliding the [ I/0 ] switch to the
0
position.
Only use the clipper on dry hair.
It is recommended that you start with a longer guide comb and then switch to
a shorter one for the best results.
The clipper can be set to various cutting lengths from 0.5 mm up to 30 mm.
