background image

4

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

FOR YOUR SAFETY

GENERAL PRECAUTIONS

ALWAYS

• ensure that all individuals using the compressor have read and fully 

understand the Operating Instructions supplied and are suitably trained

• stop the engine and ensure the pressure is expelled from the air receiver 

before carrying out any maintenance.

• ensure that there is adequate ventilation when spraying flammable 

materials e.g. cellulose paint, and keep clear of any possible source of 
ignition.

• protect yourself. Think carefully about any potential hazards which may 

be created by using the air compressor and use the appropriate 
protection. e.g. Goggles will protect your eyes from flying particles. Face 
masks will protect you against paint spray and/or fumes. Ear defenders 
will prevent hearing damage caused by load noise.

• consult paint manufacturers instructions for safety and usage, before 

spraying

• ensure that the air supply is turned off at the machine outlet and all 

pressurised air from the machine and other equipment attached to it, is 
expelled BEFORE disconnecting air hoses or other equipment.

•  make sure that children and animals are kept well away from the 

compressor and any equipment attached to it.

•  ensure that any equipment or tool used in conjunction with your 

compressor, has a safety working pressure exceeding that of the 
machine. 

DO NOT

•  direct a jet of air at people or animals, and NEVER discharge 

compressed air against the skin. Compressed air CAN BE dangerous!

WARNING: AS WITH ALL MACHINERY, THERE ARE CERTAIN HAZARDS 
INVOLVED WITH THEIR OPERATION AND USE. EXERCISING RESPECT AND 
CAUTION WILL CONSIDERABLY LESSEN THE RISK OF PERSONAL INJURY. 
HOWEVER, IF NORMAL SAFETY PRECAUTIONS ARE OVERLOOKED, OR 
IGNORED, PERSONAL INJURY TO THE OPERATOR, OR DAMAGE TO 
PROPERTY MAY RESULT. IT IS IN YOUR OWN INTEREST TO READ AND PAY 
ATTENTION TO THE FOLLOWING RULES:

Содержание XPP15/50

















Отзывы: