8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
OPERATION
FITTING THE IMPACT SOCKET
1. Select the impact socket you
require, which must be in good
condition and fit the tool exactly.
2. Push the socket onto the 3/4”
square drive shaft as shown.
ADJUSTING THE DIRECTION AND SPEED
1. To adjust the speed, turn the switch
slowly forward until the desired
output is achieved.
• Setting 1 (small dot) is the least
amount of power while setting 3
(large dot) is the most powerful.
• The wrench operates at
maximum power in reverse. This
setting is for releasing threaded
fasteners.
NOTE:
Where the torque setting is critical, the final tightening must be by
hand using a correctly calibrated torque wrench.
WARNING: NEVER USE STANDARD SOCKETS. THESE MAY SHATTER WITH
SERIOUS CONSEQUENCES. ONLY USE IMPACT SOCKETS DESIGNED FOR
USE WITH IMPACT TOOLS.
WARNING: WAIT UNTIL THE WRENCH HAS STOPPED ROTATING BEFORE
OPERATING THE FORWARD/REVERSE SWITCH.
Содержание X-Pro CAT204
Страница 16: ......
