4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
14. This air tool should be serviced at regular intervals by qualified service
personnel.
15. Avoid damaging the air tool by applying excessive force of any kind.
16. Always maintain the air tool with care. Keep it clean for the best and safest
performance.
17. ALWAYS ensure the workpiece is firmly secured leaving both hands free to
control the tool.
18. ALWAYS ensure the tool has stopped before putting it down after use.
19. ALWAYS ensure that any attachments are correctly fastened before
connecting the tool to the power supply
20. Do not force or misuse the air tool. It will do a better and safer job at the
rate for which it was designed.
21. Quick change couplings should not be located at the tool. They add
weight and could fail due to vibration.
22. Do not remove any labels. Damaged labels should be replaced.
23. This tool vibrates with use. Vibration may be harmful to your hands or arms.
Stop using the tool if discomfort, a tingling feeling or pain occurs. Seek
medical advice before resuming use.
SANDER-SPECIFIC SAFETY RULES
1. Inspect the sanding pad before use. Do not use if cracked or broken.
Check that the rated speed of the backing pad is at least as high as that
of the machine.
2. Avoid contact with the moving sanding pad and wear suitable gloves to
protect the hands.
3. Never start the tool unless the abrasive pad is applied to the workpiece.
4. Beware of potentially explosive atmospheres being caused by dust / fumes
resulting from sanding and use dust extraction systems where possible.
5. Always wear a face mask when using the sander as protection from
airborne particles of sanded material. Avoid disturbing existing dust and
minimise the scattering of dust in the workplace environment. Take steps to
control the dust at the point of emission.
DUST EXTRACTION
The sander is provided with a dust extraction facility. Please note however,
that this does not preclude the user from wearing a face mask to prevent the
inhalation of dust particles.
Содержание X-PRO CAT 160
Страница 16: ......
