background image

 3

Please read these instructions carefully before operating the tool

Thank you for purchasing this 

CLARKE 

Planer designed for trade use.

Before using the device, please read this manual thoroughly and carefully follow all
instructions given. This is for your own safety and that of others around you, and is also to
help you achieve a long and trouble free service from your new tool.

CONTENTS

Page

Specifications : .............................................................................................. 2

Carton Contents : ......................................................................................... 2

Parts and Service Contacts : ....................................................................... 2

Guarantee : ................................................................................................... 3

General Safety Precautions : ...................................................................... 4

Additional Precautions for Planers : ........................................................... 5

Electrical Connections : ............................................................................... 6

Unpacking and Carton Contents : ............................................................ 7

Operation : .................................................................................................... 8

Rebating : ...................................................................................... 9

Maintenance : ............................................................................................ 10

Replacing Cutter Blades : ......................................................... 10

Replacing Drive Belt : ................................................................. 11

Replacing carbon Brushes : ...................................................... 11

Parts Diagrams and Lists : ...................................................................... 12-13

Vibration Emissions : .................................................................................... 14

Declaration of Conformity : ...................................................................... 15

Vibration Emission Declaration : ............................................................... 15

CLARKE GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a
period of 12 months from the date of purchase. Please keep your
receipt as proof of purchase.

This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.

Faulty goods should be returned to their place of purchase, no product
can be returned to us without prior permission.

This guarantee does not affect your statutory rights.

Содержание WOODWORKER CON1020

















Отзывы: