Clarke Woodworker CBS1-5, Инструкция по эксплуатации и техническому обслуживанию

Страница: 7 / 16

7
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
ASSEMBLY
BELT TABLE
1. Gently ease the table into place
with the belt support entering the
slot in the table.
2. Screw the Table Locking Lever into
place, ensuring a flat washer is
used on the levers’ threads.
DISC TABLE
1. Slide the table pegs into the slots
in the Upper Disc Cover to the
extent that the Locking Levers
can be screwed in as shown
overleaf, ensuring flat washers are
used on the locking lever threads.
2. With the table secured, position
the Disc Cover/Dust Extraction
Port as shown, with the locating
pin on the cover ‘A’, engaged in
the slot in the hinged cover ‘B’.