T
hank you for purchasing this CLARKE Water Pump, which is a general purpose
pump, suitable for a variety of applications involving the transfer of clean, cold
water ONLY.
The CEB101 differs from the TAM 100 model in that it has a brass body designed for
longer life, and an increased resistance to corrosion.
To help ensure long, trouble free performance and the protection afforded by
the warranty, please follow carefully all the instructions and recommendations
given in this booklet.
GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt as proof of purchase.
This guarantee is invalid if the product is found to have been abused or tampered
with in any way, or not used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase. No product can be
returned to us without prior permission. This guarantee does not effect your
statutory rights.
SAFETY PRECAUTIONS
1.
Ensure the pump is installed in a horizontal position with the outlet facing
vertically upwards, and that it is firmly anchored via its fixing screws.
2.
Ensure there is an adequate air flow around the pump. DO NOT mount it in an
enclosed atmosphere.
3.
Ensure all water pipes - supply or discharge, are adequately supported where
necessary, so as not to put a strain on the pump connections.
4.
DO NOT allow the pump to run dry, as this will cause serious damage to the
pump seals.
5.
Ensure the inlet to the pump is completely unrestricted.
6.
Ensure the pump is protected from the elements, neither the motor nor the
electrical terminal box is intended to be waterproof.
7.
Ensure that all pipes are protected against damage where necessary, and
that they are suitably lagged to avoid the possibility of freezing during cold
weather.
2
SPECIFICATIONS
TAM100
CEB101
Motor
230V 50Hz 1ph
230V 50Hz 1ph
Power
0.5HP
0.5HP
Speed
2800 RPM
2800 RPM
Max. Head
44M
40M
Max. Lift (Suction)
8M
8M
Bore Size
1”BSP
1”BSP
Max. Output
40 litres/min
38 litres/min
Weight
5.8kg
6.25kg
Part Number
7320035
7230320
NOTE: As the pumping head is increased, so the flow rate of water will decrease.
ACCESSORIES
1” Foot Valve Filter
7950561
1” BSP Spigot Hose Connector
7950210
1” I.D. Reinforced Hose for suction and delivery.
7955010
1” I.D. Layflat Hose for delivery only.
7955110
7
Please contact your nearest dealer, or
CLARKE International, on one of the following numbers.
PARTS & SERVICE TEL: 020 8988 7400
PARTS & SERVICE FAX: 020 8558 3622
or e-mail as follows:
PARTS: [email protected]
SERVICE: [email protected]
Please note that the details and specifications contained herein, are correct at the time of going to
print. However, CLARKE International reserve the right to change specifications at any time without
prior notice. Always consult the pump’s data plate
PARTS & SERVICE
