7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INSPECTION BEFORE USE
These ramps shall be maintained in accordance with the instructions
provided. Inspection shall be made of each ramp prior to use. Keep ramps
free of dirt and oil. Do not use if ramps are damaged in any way.
OPERATION - AS LOADING RAMPS
• Always load or unload on a solid, level, well lit and stable surface
• Use caution when loading and unloading equipment.
1. Unfold the ramps and place the lip
of the ramp over the tailgate of the
vehicle.
• The tailgate should be no more
than 76cm in height or the
incline will be too steep.
• Check that the angle ramp is
positioned fully on the tailgate of
your truck or trailer.
2. Secure the ramp to the loading
surface using adjustable safety straps.
• Test the ramp by pulling backwards on it. Make sure it does not slide
back or disengage from the loading surface.
3. Centre the load between the sides of the ramp.
4. Load the ATV,
• Make sure that the ramp is sustaining the load and not bowing from the
weight.
5. Continue until the ATV is fully loaded / unloaded. Secure the load once in
position.
AFTER USE
1. Unhook the adjustable straps and fold the ramps.
2. Store in a clean, dry and childproof environment.
WARNING: THE WARNINGS, CAUTIONS AND INSTRUCTIONS REFERRED TO
IN THIS MANUAL CANNOT COVER ALL POSSIBLE CONDITIONS AND
SITUATIONS THAT MAY OCCUR. IT MUST BE UNDERSTOOD THAT COMMON
SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO THIS
PRODUCT, BUT MUST BE APPLIED BY THE OPERATOR.
Содержание STRONG-ARM CFSR500P
Страница 8: ......