Clarke strong-arm CBJ30, Инструкция по эксплуатации и обслуживанию

Страница: 4 / 12

4
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
20. Always examine the jack before use. Make sure that all parts are in good
condition and operating smoothly, and that no cracks or distortion is
apparent. If in doubt do not use.
21. Do not push a vehicle off the jack or start the engine while supported only
by the jack.
22. Do not use if an oil leak is apparent. Consult the Clarke Service
Department.
23. If more than one jack is used in unison, they must all be of the same rating
and be raised at the same speed to reduce the possibility of the load
slipping.
SAFETY SYMBOLS
The following safety symbols may be found on the product.
Read the user manual before use.
LIFTING O PERATIONS AND LIFTING EQUIPMENT R EGULATIONS 1998
This jack, depending on use, may fall within the scope of L O LE R . It is the
owner’s responsibility to determine whether or not it does and, if so, to comply
with any applicable requirements in L
O LE R , for having the jack thoroughly
examined.
ENVIRONMENTAL PROTECTION
1. Take care to ensure that if hydraulic oil is spilt that it is cleaned away using
sand or treated with absorbent granules designed for the purpose.
2. Always make every effort to contain any spillage and prevent ingress into
the local water course.