7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
9. Keep the battery on charge until the ammeter gauge reads zero (or 0-2
amps) or has stopped moving down. Then switch off at the machine.
NOTES ON CHARGING PROCEDURE
• A complete charge is best done slowly in order to protect your battery
so we recommend the MIN setting as described above.
• A complete charge may take up to 10 hours.
• If a low amperage reading (2 amps or less) is seen on the gauge at
either the MIN or MAX setting. This may indicate that the battery is either
(a) already fully charged or (b) at the end of its useful life and in need of
replacement.
• Do not charge the battery for longer than is necessary.
WARNING: NEVER ATTEMPT TO RE-CHARGE NON-RECHARGEABLE BATTERIES
WARNING: IF THE FIXED POSITIVE LEAD AND THE FIXED NEGATIVE LEAD
ARE CONNECTED TO THE WRONG TERMINALS, A FLASH WILL OCCUR
WHEN THE 2ND. CLAMP IS ATTACHED. DAMAGE TO THE CHARGING UNIT
AND THE BATTERY WILL BE AVOIDED AS YOUR STARTER/CHARGER IS FITTED
WITH A POLARITY PROTECTION FEATURE. IT WILL HOWEVER BE NECESSARY
TO REPLACE THE INTERNAL FUSE. REMOVE THE BLACK PLASTIC COVER ON
THE FRONT PANEL (MARKED FUSE) AND REPLACE THE DAMAGED FUSE.
Содержание Start-N-Charge BC120C
Страница 20: ......
