5
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
INSTALLATION
Because of the variety of possible installations, no plumbing accessories are
supplied with your pump, however accessories are available from your
nearest CLARKE dealer. Contact your CLARKE dealer for further information,
or CLARKE International Sales Department on 01992 565333.
Note: It is recommended that the end user should consult a qualified installer
if there are any doubts as to the suitability of this product for a particular
installation.
IMPORTANT: The pump MUST NOT be connected to the mains power supply
until all hose/pipe installation is completed.
INSTALLATION OF THE PUMP
A typical installation of a swimming pool pump is shown in Fig 1. The pump
must always be installed and operated in a horizontal position i.e. with the
outlet port facing vertically upwards. The fixing holes in the base should be
used to secure the pump firmly in it’s operating position. Mount the pump on
raised blocks or a purpose built platform to protect it from flooding. Some
kind of anti-vibration mounting is also desirable.
Always ensure there is adequate air circulation around the motor. The pump
should be installed in a dry, well ventilated enclosure, sheltered from rain,
such as a purpose built pump room.
The pump is usually installed after the pool skimmer and the pool filter and
should be positioned as near to the pool water level as possible. In other
applications, a suction strainer should be used to protect the pump from
ingress of foreign matter.
Fig 1
Pool
Skimmer
outlet
Pool Filter
Pool Side
Remote Power
Connection
Содержание SPPT1
Страница 1: ...OPERATING MAINTENANCE INSTRUCTIONS GC05 12 SWIMMING POOL PUMP Model SPPT1 Part No 7175040 ...
Страница 16: ......
