background image

5

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

NOTE: 

Using the battery test button whilst the battery is on charge gives 

false information. When the battery is on charge, the level 
indicator glows RED: pressing the battery level test button will 
cause the indicator to turn GREEN. Release the button and the 
indicator returns to RED.

To charge the battery from the 12v car battery, ensure the lamp is switched off 
and connect the small plug of the DC charger into the AC/DC charging 
socket. Plug the other end into the cigarette lighter socket.

DO NOT

 leave on charge for long periods, (more than 4 hours), as the result 

may be a flat car battery.

Use either the AC or the DC charging adapters supplied to charge the 
battery.

If you plan to store the lamp for long periods, it is recommended to fully 
charge the battery first using the AC charger.

 

This will ensure the longest 

possible battery life.

When not in use, it is recommended to recharge the battery at least every four 
months.

A fully charged battery will give approximately 5 hours of continuous use, 
(lamp only).

OPERATING INSTRUCTIONS

1. Ensure the 12v power cable (Item 7 - Fig. 1), is firmly connected between 

the 12v power socket on the back of the power pack and the 12v DC input 
socket on the back of the lamp. Switch the lamp on using the ON/OFF 
switch.

2. Loosen the adjusting knobs and adjust to the desired angle, retighten both 

knobs once desired position is found, DO NOT ovetighten.

3. The unit can be used as a 12v power supply to power other 12 DC 

appliances at the same time as using the lamp, using the 12v Power socket 
and the twin socket adapter. Using power tools etc this way will obviously 
shorten the use time.

The lamp can be run directly from any 12v DC supply using the correct cable, 
e.g. the 12v power cable supplied can be connected to the 12v DC input 
socket and the car cigarette lighter socket.

NOTE:  

The 12v power cable and 12v DC charger and AC charger are 

stored in the bottom of the battery pack. To access them, turn the 
lamp upside down and slide the cover towards the cushioned 
base, (front).

Отзывы: