Clarke RWL10, Инструкция по эксплуатации

Страница: 6 / 8

6
MAINTENANCE
CHANGING THE BULB
WARNING: MAKE SURE THE LAMP IS SWITCHED OFF BEFORE CHANGING THE
BULB
1. Remove the hood from the spotlight
by turning it slightly.
2. Carefully lift the hood and reflector
away from the torch.
• You should be able to see a
spring clip (1) and 3 wires (3).
3. Remove the 3 wires (3) making a
note of which wire connects to
which terminal
4. Remove the spring clip (1)
5. Pull the bulb (2) out of the reflector.
6 Hold the new bulb using a lint free cloth and install it by reversing the procedure
above.
NOTE: Do not touch the bulb with your hands, The oils on the skin will shorten the
life of the bulb.
REPLACING THE BATTERY
1. Lift the work light and unscrew the
two screws indicated in the picture
(fig. 4), Unscrew them anti-clockwise.
2. Remove battery braces with phillips
screwdriver.
3. Securely grip the exposed end of the
battery and carefully slide it a few
inches out of the housing (fig. 5).
4. Disconnect the battery terminal wires.
Remove the black negative wire first.
5. Carefully remove the battery.
6. Replace with a 12V 7AH Sealed Lead
Acid Battery available from your
Clarke dealer and install by reversing
the above procedure.
•
Take care not to pinch or cross-
connect any wires.
Unscrew
Fig.3
Fig.4
Fig.5