Clarke RANGER 64, Инструкция по эксплуатации и техническому обслуживанию

Страница: 11 / 24

11
ASSEMBLY
WARNING!
Before assembling and using the air compressor, make sure that you have
read and understood all of the safety instructions.
Installation
Take care when lifting the compressor from the packaging. Use the rear handle
and place one hand under the front of the tank.
Caution! Do not lift the compressor by the Pressure regulator and cut-out. Get
assistance if necessary. This unit weighs 30kg.
After removing the compressor from its packaging, check the integrity of the
unit, making sure it has not been damaged in transit.
Positioning the air compressor
This compressor should be placed on a stable,
flat surface. See figure 1.
If it is placed on a shelf or surface raised off the
ground, it must be secured appropriately to
prevent it from falling off during use.
Do not cover or box in the compressor. Always
position it with good all round ventilation.
Moving the air compressor
Before moving the compressor, switch it off and disconnect from the mains
power supply.
• Always use the handle.
• Do not lift by (or put strain on) the air regulator fittings, valves or hoses.
• Take care when moving the compressor to avoid damaging the valves or
fittings.
The compressor is heavy, take care when lifting and moving this compressor,
get assistance if necessary to avoid personal injury.
Figure 1
12345678901234567890
12345678901234567890
12345678901234567890
12345678901234567890
15
0