Clarke PRO236, Инструкция по эксплуатации и обслуживанию

Страница: 7 / 12

7
Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com
PREPARATION FOR USE
INSTALLING THE BATTERIES
1. Open the cover of the battery
compartment by turning it anti-
clockwise & insert four AAA batteries
as shown. Close the compartment
cover and the wrench is ready to use.
TURNING THE WRENCH ON /OFF
1. Press the button to turn on.
• The unit will bleep and the complete
display screen will momentarily light up.
2. Press the button again to turn the system off.
TURNING THE DISPLAY ILLUMINATION ON/OFF
1. The display illumination can be turned on or off by pressing the
button.
AUTO POWER-OFF SETTING
When enabled, this setting means that the wrench will turn off automatically if
no buttons are pressed during a given time. Change the
Auto/Off
setting as
follows:
1. Once the unit is powered up, press three times and the default
Auto/Off time of
5
(5 minutes) is shown on the display.
2. Press the button to select the shut-off time of 5 or 15 minutes, or OFF
to turn off the Auto-Off function.
3. Press the button to confirm the selection. The wrench will return to
the measurement mode.
Note; If no buttons are touched for 3 seconds the wrench will return to
the measurement mode.