10
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
OPERATION
CAUTION: NEVER USE THE TORQUE WRENCH WHEN THERE IS A LOW
BATTERY CONDITION AS THE TORQUE WRENCH ACCURACY WILL BE
AFFECTED.
CAUTION: NEVER EXCEED THE PERMITTED MAXIMUM TORQUE VALUE
FOR THIS WRENCH. OVERLOADING THE WRENCH COULD CAUSE
DAMAGE.
1. Select the socket required and attach it to the square drive. If possible,
avoid the use of flexible extensions or universal joints which could possibly
result in inaccurate torque readings.
2. Engage the nut or bolt and apply a steady pull with the wrench.
• As the torque reaches half the target value, the LED will show a
yellow light, as the target torque is reached, the LED will illuminate in
green and the alarm will bleep. When the target is exceeded by
approximately 2% the LED will show a red light accompanied by a
continuous alarm tone.
• If in the
PEAK
mode, the measured torque will be displayed and the
highest value measured will remain as a flashing display until the
wrench is re-set for the next measurement by pressing the button,
or the wrench reaches the time limit to automatically power-off.
• If in the
TRACK
mode, the actual torque applied at any moment will
be displayed.
3. When the continuous tone is heard, you have reached/exceeded your
target torque, so stop pulling immediately.
Note: if the wrench is operated to its maximum range, the coloured LED
will indicate green at 98% of the range, yellow at 100% and then
change to red with a continuous tone and
‘ERRO
‘ displayed
above this point.
CARE OF THE TORQUE WRENCH DURING USE
1. For assured accuracy of the wrench, periodic self re-setting is necessary as
described under MAINTENANCE & CALIBRATION.
2. Check that the wrench capacity is adequate for the anticipated load
before proceeding and do not exceed the maximum torque setting for
the wrench as stated in the Technical Specification.
3. Re-set the wrench as described under MAINTENANCE & CALIBRATION, if
you believe its capacity may have been exceeded.
Содержание PRO236
Страница 12: ......