7
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
6. Re-set of the unit if you believe its capacity may have been exceeded.
7. Never use the wrench to undo bolts & nuts which may be excessively
tight. Very tight nuts and bolts should be loosened with a standard wrench
and the torque wrench used only for re-tightening.
8. Do not expose the wrench to extreme temperature, humidity or direct
sunlight for extended periods.
9. Avoid using knuckle or universal joints, as these could possibly result in
inaccurate torque settings.
STORAGE & CLEANING
1. Store in a clean, dry environment away from excess heat, humidity or dust.
2. If the wrench is not to be used for long periods of time it is advisable to
remove the batteries to avoid the risk of leaking.
3. Clean by wiping the tool and the display with a soft cloth. Never immerse
it in water or any type of solvent or cleaning fluid.
MAINTENANCE & CALIBRATION
The wrench has been calibrated at the factory order to ensure accurate
readings and should not require any re-calibration. The original calibration
certificate should be supplied.
If inaccuracy is suspected, contact your local Clarke dealer.
To maintain the accuracy of the wrench periodically reset by holding the
M/
u
and buttons together.
Do not attempt to dismantle the wrench.
BATTERY USE AND CARE
1. If when switching on, there is no reading on the display, or the ‘Battery
Condition Indicator’ on the panel is empty, the batteries must be
replaced.
2. Never combine used batteries with old ones or mix battery types.
3. Never use a battery if it is cracked or damaged.
4. Always dispose of old batteries appropriately. Never either dump or
incinerate old batteries.
Содержание PRO235
Страница 8: ......
