5
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
PREPARATION FOR USE
FITTING THE BATTERIES
1. Unscrew the battery cap.
2. Install batteries (2 x CR2032 as supplied) with their marked faces outwards,
and screw the cap back on.
•
If the batteries are in poor condition the icon will flash during
operation and new ones should be fitted.
•
Typical life of the batteries is 60 hours continuous use.
SWITCHING ON & OFF
1. Press the
button to turn the wrench on.
•
The LCD panel will display all characters and after 2 seconds the display
will show 0.00.
•
The wrench will be in
‘TRACK’
mode, i.e., it will measure and display the
actual torque detected.
3. To manually turn the wrench off, press and release the button.
•
If you do not use the wrench for 3-4 minutes it will turn off automatically.
4. Never turn the wrench off while force is applied.
DISPLAY LIGHTING
1. Press the button
for the display lighting to come on.
2. Press again to turn the lighting off.
HOW TO SET ‘TRACK’ OR ‘PEAK’
1. Press and release the
M/u
button to exit
peak,
if
track
is preferred.
•
The display can alternate between
peak
and
track
(track is the default
mode and is not displayed.
HOW TO SELECT THE UNIT OF MEASUREMENT’
1. Press and hold the
M/u
button for 2 secs.
•
The display will scroll quickly through the available units of measurement.
(N.m, lbs-in, lbf.ft and Kgf.m).
2. Release the
M/u
button when your required unit is shown.
Содержание PRO235
Страница 8: ......
