background image

SWITCHING OFF

Turn the control knob to the ‘START’ position. To turn OFF the heater completely, remove the access
panel and shut the valve on the gas cylinder by turning the knob clockwise fully.

STORAGE

The heater is constructed from materials to withstand normal weather conditions, however, it is advised
to store under cover for maximum preservation.

If there are problems of space, the reflecting hood (1) can be removed, and the nuts and washers
preserved with care (NB: they are all stainless steel).  Remove the cylinder from its compartment.  Enclose
the burner unit in a polythene bag and similarly wrap the side covers to prevent the possibility of local
wild life from setting up home...particularly during the summer months..

RESTARTING AFTER STORAGE

IMPORTANT:  Ensure the underside of the reflecting hood is as clean as possible.

Remove the radiating diffuser (9), by removing the three screws around the outer band (14), clean
inside and out with an ordinary cloth (DO NOT USE oily products that would produce fumes when the
heater is next switched on).

Remove any cobwebs and dust from the conical protector (13).

Reassemble all the parts.

Check the rubber hose (8) and if cracked or damaged in any way, replace it with a hose of NOT MORE
THAN 1 metre in length.

MAINTENANCE

There are no user serviceable parts for this heater.  It is necessary only to keep the various components
clean, particularly the underside of the hood.  DO NOT clean the heater when it is lit or only just switched
off.  Wait until it has cooled down. Clean using a clean soft cloth.

CHECK annually that the hose (8) connecting the regulator (19) and control valve (7) is in good order:
otherwise, replace it. (see your Clarke dealer)

Any repairs should be made by trained technicians and with original replacement parts. For parts and
servicing, consult your CLARKE dealer.

SPECIFICATIONS

Type of gas

Propane

Rated pressure

37mbar

Rated heating capacity

10 KW

Consumption

0.700 kg/h

Part No.

White

6920007

Silver

6920009

Black

6920011

Stainless Steel

6920012

Green

6920013

6

Содержание PHT2









Отзывы: