Clarke Mini-Max 26 Скачать руководство пользователя страница 21

Страница: 21 / 122

ENGLISH

Clarke

Operator’s Manual (EN) - FOCUS II MID-SIZE AUTOSCRUBBER

FORM NO. 71483A - 21 -

Figure 21

MAINTENANCE

WARNING: Maintenance and repairs must be done by

authorized personnel only.

WARNING: Always empty the solution tank and re-

covery tank before doing any mainte-
nance.

WARNING: Keep all fasteners tight.

These Maintenance Procedures Must Be Done Every Day

Keep the machine clean, it will need fewer repairs and have lon-
ger life.

Do These Procedures When You Begin Your Work Period

1. Turn off key switch.

2. Disconnect AC power from battery charger (follow charger

instructions).

3. Make sure the screen fi lter over the vacuum motor is clean

and in position (see fi gure 21.

4. Make sure the valve on the recovery drain hose is clean.

Tightly close the valve.

5. Make sure the brushes are in position and installed cor-

rectly

6. Check the installation of the squeegee and squeegee

hose.

7. Make sure the solution drain/level indicator hose is secure

on upper fi tting.

Содержание Mini-Max 26



























































































































Результаты поиска

Содержание Mini-Max 26

Отзывы:

Clarke Mini-Max 26, Руководство оператора, Страница: 21 / 122

Результаты поиска

Содержание Mini-Max 26

Отзывы: