Clarke MGH1, Инструкция по эксплуатации и обслуживанию

Страница: 11 / 16

11
• If it goes out soon after lighting, check for drafts or for the gas bottle
running out of gas.
• If it goes out after about 30 minutes, it Is an indication that ventilation in
the room is inadequate. If so, the heater may have been shut off by the
Oxygen Depletion Sensor. Open a window or door to ventilate the room
and re-ignite.
CLEANING AND MAINTENANCE
WARNING: NEVER ATTEMPT TO SERVICE THE HEATER WHILE IT IS CON-
NECTED TO THE GAS SUPPLY. ALLOW TO COOL BEFORE SERVICING.
CLEANING (annually or as required)
1. Turn heater off and let cool down before cleaning.
2. Use a damp cloth wrung out in a solution of soapy water to clean the
exterior and bottle storage area of the heater. Use household cleaners on
difficult spots.
3. Clean inside heater using compressed air where possible. Blow air back
and forth along the entire burner face and ceramic plates until all dust
has been dislodged from surface. Take care not to knock the ceramic
plates which can become fragile in use. Use compressed air to clean the
pilot light opening and the gas outlets.
4. Wipe the heater completely dry before use, ensuring that no water gets
into the burners or pilot light area.
5. Never use abrasive cleaners as they may damage the paint finish.
GENERAL MAINTENANCE
1. Inspect heater before bringing back into use. Check connections for leaks
by applying a mixture of liquid soap and water to hose connections. Any
bubbles forming show a leak, which must be corrected before use.
2. Regularly check the flexible tubing between the regulator and heater
and replace if cracked. In the event of damage or broken components,
replacements should only be obtained from Clarke Parts & Service.
3. Have the heater inspected yearly by a qualified service agent.
STORAGE
1. For long term storage, always disconnect the bottle and store the heater
in a well ventilated area away from combustible materials. The bottle is
best kept in an outbuilding and preferably not in a basement or indoors.
Cover the heater in its original packing and keep the unit dry and dust
free.