Clarke JSM200 Скачать руководство пользователя страница 4

4

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

17. Never allow the jumpstart leads, to touch each other or to touch the 

same metal object.

18. Ensure the vehicle battery posts and battery clamps are perfectly clean 

before use.

19. Connect the red clamp to the unearthed battery terminal first, (this is 

usually the positive (+ve) terminal and coloured RED); then connect the 
black clamp to the earthed battery terminal, (this is usually the negative (-
ve) terminal and coloured BLACK).

20. ALWAYS wear suitable protective clothing and eye protection when 

working with lead acid batteries.

21. NEVER allow the cables to become wrapped around the operator or any 

other person.

22. Wipe the body of the unit clean using a soft damp cloth, do not use 

abrasives to clean this product.

ELECTRICAL CONNECTIONS

This device is supplied with a 13 amp, 230 volt (50Hz), charging adaptor for 
connection to a standard, domestic electrical supply.

This appliance is of double insulated design. No earth conductor is provided.

If in any doubt, consult a qualified electrician. DO NOT attempt any electrical 
repairs yourself.

SAFETY SYMBOLS

Class II appliance (mains 
adaptor only)

Always read instructions 
before use

Suitable for indoor use 
only (refers to mains 
adaptor only)

Subject to Waste Electrical 
& Electronic Equipment 
Directive

Live centre pin

Class III appliance (main 
unit only)

-

+

Содержание JSM200












Отзывы: