![Clarke ISP11A Скачать руководство пользователя страница 3](http://html1.mh-extra.com/html/clarke/isp11a/isp11a_operating-and-maintenance-instructions-manual_2616162003.webp)
3
SAFETY PRECAUTIONS
1.
This pump is designed to pump
WATER ONLY.
Never use for pumping
flammable liquids or chemicals of any kind.
2.
NEVER
allow the pump to run dry.
3.
An approved Residual Current Device (RCD)
MUST
be used when pumping
from ponds or swimming pools.
4.
Your submersible pump may
ONLY
be used for pumping water from a swimming
pool when there is no person or animal in the pool.
5.
ALWAYS
disconnect the pump from the electrical supply
before placing into, or removing from water, and
before any cleaning or maintenance.
6.
When raising or lowering the pump,
ALWAYS
use
a rope or chain attached tothe handle.
NEVER
lift or carry the pump by the mains cable or the
float switch cable.
7.
DO NOT
run the pump with the body exposed
for longer than 10 minutes.
8.
DO NOT
install the pump on sand, silt, mud etc.,
or ground which is likely to shift.
9.
If pumping water which is liable to freeze, the
pump
MUST
be run continuously, otherwise the pump must
be removed from the water and stored in a frost free location.
10. If the pump is to be used where there may be silt or mud
(e.g., garden ponds),
ALWAYS
keep the pump clear of any sediment by
standing it on a platform or bricks or suspending from a rope or chain attached
to the handle.
11.
DO NOT
use for permanent installation in pumping clean or pure water,
(particularly drinking water), as there is the remote risk of contamination, should
there be a leak in the seal device.
12. If the mains cable becomes damaged, it
MUST
be replaced - NOT repaired.
(see Electrical Installation).
13. If used in a confined space - in a shaft or sump etc.,
ENSURE
the float has
sufficient room to operate correctly (see Installation on page 6).
14. Connection to the mains supply
MUST
be made well clear of the water, or, if in close
proximity, it must be completely waterproofed and secured to prevent the possibility
of it coming into contact with water. If necessary consult a qualified technician.
WARNING
Failure to comply with these safety precautions could be extremely
hazardous, not only causing a risk to personal safety but also damage to
the pump, which could invalidate your guarantee.
Содержание ISP11A
Страница 12: ......