10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
WHEN CHARGING IS COMPLETE
1. When charging is complete the green Charged LED will come on.
2. Switch off the charger and disconnect the plug from the power socket.
3. Remove the leads from the battery as described in the previous sections.
STORAGE
Store the mains lead and clamps in
the compartment shown when not
being used.
MAINTANENCE
This charger requires minimal maintenance. As with any appliance or tool, a
few common sense rules will prolong the life of the battery charger.
1. Keep in a clean, dry area.
2. Wind up the leads when not in use.
3. Clean the case and leads with a moist cloth.
4. Clean corrosion from the clamps with a solution of water and baking soda.
5. Examine the leads at regular intervals for damage and have them
replaced if necessary.
WARNING: ALWAYS BE SURE THE CHARGER IS UNPLUGGED BEFORE
PERFORMING ANY MAINTENANCE OR CLEANING.
WARNING: ALL OTHER SERVICING/REPAIRS SHOULD BE DONE BY
QUALIFIED PERSONNEL ONLY.
Содержание HFBC12
Страница 16: ......
