Clarke FG4050ES, Инструкция по эксплуатации и техническому обслуживанию

Страница: 8 / 32

8
UNPACKING AND ASSEMBLY
Unpack your generator and check to ensure the following items are present.
Should there be any deficiency or damage caused during transit contact
your Clarke dealer immediately.
• The generator
• Spark plug box spanner
• Tommy bar
• Wheel kit
FITTING THE WHEEL KIT
1. Lay the generator on it’s front and
attach the 2 feet to the frame
using 4 x Short bolts, 4 x Washers,
4 x Spring washers and 4 x Nuts.
2. Slide both wheels on to the axle.
NOTE: Make sure that the valve on
each wheel is on the outside.
3. Secure the wheel to the axle using
a split pin.