Clarke FG4050ES, Инструкция по эксплуатации и техническому обслуживанию

Страница: 15 / 32

15
5. Insert the key into the ignition.
6. Turn and hold the key in the START
position.
7. Once the engine starts to run turn
the key back to the ON position.
8. Once the engine has warmed up,
set the choke lever to the OFF
position pushed in).
BACKUP STARTING PROCEDURE
If for any reason the engine will not start using the above procedure, you can
start your generator manually by carrying out the following.
1. Set the ignition key to the ON
position.
2. Pull the starting handle lightly until
you start to feel resistance and
then pull up sharply to start the
generator.
3. You may have to do this more
than once.
.
WARNING: ONCE THE GENERATOR HAS STARTED, RELEASE THE STARTING
HANDLE SLOWLY TO AVOID INJURY/DAMAGE AS IT WHIPS BACK.