7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
FITTING THE HANDLE
1. Attach the handle using the three
socket head screws and washers
provided.
NOTE:
The hand controls will be
located closest to the spark
plug on the side of the
machine.
FITTING THE THROTTLE CABLE
1. Unscrew the centre cap and lift
away the air filter housing in order
to gain better access to the
carburetor parts.
2. Pass the throttle cable through
the small bracket so as to locate
the cable into the groove in the
swivel block on the throttle lever.
3. Ensure the bead on the end of the
cable rests beyond the groove, to
position the cable before
screwing the threaded guide into
the bracket.
4. When the cable is secure,
operate the throttle lever to check for correct movement of all parts
before tightening the locknut on the threaded guide to eliminate any play
in the cable.
Содержание ED160A
Страница 16: ......
