4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7.
NEVER
allow anyone without the necessary physical strength to operate
this machine as it may vibrate and its handling will requires a degree of
physical exertion.
MACHINE USE AND CARE
1.
Do not force the machine.
Use the correct machine for your application.
The correct machine will do the job better and safer at the rate which it
was designed.
2.
Do not use the machine if the switch does not turn it on and off.
Any
machine that cannot be controlled with the switch is dangerous and must
be repaired.
3.
Store idle tools out of the reach of children and do not allow persons
unfamiliar with the machine or these instructions to operate the machine.
Machines are dangerous in the hands of untrained users.
4.
Maintain machines.
Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the machines
operation. If damaged, have the machine repaired before use. Many
accidents are caused by poorly maintained machines.
5.
Keep cutting tools sharp and clean.
Tools with sharp cutting edges are less
likely to bind and are easier to control.
6.
Use the machine and accessories in accordance with these instructions
and in the manner intended, taking into account the working conditions
and the work to be performed
. Use of the machine for operations different
from intended use could result in a hazardous situation.
7.
ALWAYS
check to ensure the auger securing bolts are tight before each
use.
8.
ALWAYS
observe all safety precautions for the handling of fuel.
9.
NEVER
refuel the engine whilst it is running, and allow the engine to cool
sufficiently before refuelling. Use ONLY recommended 2-stroke mixture.
10.
NEVER
make any adjustment or perform a service operation with the
engine running.
Содержание ED160A
Страница 16: ......
