Clarke ECSS-1 Скачать руководство пользователя страница 3

Страница: 3 / 16

SAFETY PRECAUTIONS

• Ensure your mains voltage corresponds to the voltage mentioned on the

rating plate.

• Persons with limited physical or mental abilities should not be allowed to use

this chainsaw sharpener, unless they are supervised by a qualified person.

• The unit is designed for sharpening all common chainsaw chains. Do not

use it for any other purpose.

• Do not sharpen damaged chainsaw chains.

• Do not operate the unit without the protective cover in place and make

sure that all parts are firmly assembled before starting the unit.

• When sharpening, always wear protective goggles. Wear suitable clothes.

Take off jewellery and tie long hair back.

• Protect your ears by wearing ear protectors.

• Do not operate the unit if it does not work correctly or has been dropped.

• Do not disassemble the unit and do not try to repair it yourself. Contact your

customer support.

CONTENTS

INTRODUCTION .............................................................................................. 2

GUARANTEE ................................................................................................... 2

ENVIRONMENTAL PROTECTION .................................................................... 2

PARTS & SERVICE ........................................................................................... 2

SAFETY PRECAUTIONS ................................................................................... 3

OPERATING HINTS .......................................................................................... 4

ELECTRICAL CONNECTIONS ........................................................................ 5

PARTS IDENTIFICATION .................................................................................. 6

ASSEMBLY ....................................................................................................... 7

OPERATING .................................................................................................... 8

MAINTENANCE AND CLEANING .................................................................. 10

SPECIFICATION ............................................................................................... 11

PARTS DIAGRAM ........................................................................................... 12

PARTS LIST ....................................................................................................... 13

DECLARATION OF CONFORMITY ................................................................. 14

Содержание ECSS-1

















Результаты поиска

Содержание ECSS-1

Отзывы:

Похожие инструкции для ECSS-1

Бренды по названию

Популярные бренды

Clarke ECSS-1, Сборка и инструкция по эксплуатации

Результаты поиска

Содержание ECSS-1

Отзывы:

Похожие инструкции для ECSS-1

Бренды по названию

Популярные бренды