11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
STORAGE
1. Store the propane gas cylinders in a safe manner outdoors and keep them
below 100deg F (37 deg C).
2. Place protective bags over fittings & connectors and store in a clean, dry
place.
3. Fit the plastic cover caps which were removed when unpacking, over the
connections they covered when received.
4. When removing from storage, always check inside of heater for debris/
foreign objects before returning to use. Do not store the hose/regulator
inside the combustion chamber.
MAINTENANCE
It is essential that the heater is correctly maintained and kept in top condition
at all times.
All models are similar, in that access to the control components is gained by
removing the access panel under the base of the heater which is secured by
screws around the edge.
MONTHLY (WHEN IN CONSTANT USE)
Check the spark plug for cleanliness and correct operation. Have the gap re-
set to no more than 5mm by your Clarke service engineer.
Check the condition of the gas hose. If there are any signs of deterioration, it
should be renewed using only a Clarke original spare part.
Ensure that all connections are clean and secure.
When necessary, clean the fan and the inside of the heater thoroughly.
The use of parts other than genuine Clarke replacement parts may result in
safety hazards or decreased performance, and will invalidate your warranty.
CAUTION: DISCONNECT THE HEATER FROM THE PROPANE SUPPLY
CYLINDER(S)
WARNING: BEFORE CARRYING OUT ANY ADJUSTMENT OR
MAINTENANCE, ENSURE THE HEATER IS SWITCHED OFF, DISCONNECTED
FROM THE MAINS AND GAS SUPPLY, AND HAS BEEN GIVEN ADEQUATE
TIME TO COOL DOWN.
Содержание DEVIL 1600
Страница 24: ......
