5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
3. Place the top panel in position on
the assembly as shown in Fig 3, so
that the edge with the return fold
lies at the front, and secure loosely
to both the rear and dividing
panels with an M5 bolt, washer
and nut.
4. Lay the assembly down and offer
up the bottom panel (the edge
with the return fold uppermost).
Attach it to the rear and dividing
panels at each intersection as in
Fig 4.
5. Offer up a side panel to one end
as shown in Fig 5. Line up one of
the corner holes and insert an M5
bolt and secure with a washer
and nut.
Repeat at the other three corners.
6. Fit the remaining side panel and
loosely tighten the M5 bolts, 5mm
washers and M5 nuts.
Содержание CWC50
Страница 8: ......