7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
21. Fit the red drawer front (11) in
place and attach the handle
(10) to the drawer using the 2
screw supplied.
22. The drawer runners are marked
(DR and DL), and must be fitted
to the correct side of the drawer
when viewed from the front and
above the drawer, using the
small machine screws and nuts
23. The right hand runner (DR) must
be fitted as shown, note the
runner overhangs the rear of the
drawer slightly.
24. The left hand runner (DL) must be
fitted as shown, note the runner
overhangs the rear of the drawer
slightly.
25. Insert the drawer into the
workbench.
26. Fit the feet (7) to the workbench.
Viewed from below
Viewed from below
