4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ASSEMBLY
1. Fit the two side panels (1) to the
rear panel (3) as shown, use the
fixings (large nuts and large bolts)
supplied to secure in place.
2. Do not tighten fully at this stage.
3. Insert the Bottom Panel (2) as
shown and fix in place using the
large nuts, large bolts and
washers supplied.
4. Insert the Top Panel (2) as shown
and fix in place using the large
nuts, large bolts and washers
supplied.
5. Place the door pin into the hole
on the bottom panel as shown.
6. The allen screw, washer and nut
supplied act as the second hinge
pin, and must be fitted though
the hole in the top panel.
