background image

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE workbench.

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

Please keep these instructions in a safe place for future reference.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission.

This guarantee does not effect your statutory rights.

ENVIRONMENTAL PROTECTION

Do not dispose of old products or damaged parts with general household 
waste. All tools, accessories and packaging no longer required should be 
sorted, taken to a recycling centre and disposed of appropriately.

ASSEMBLY

UNPACKING

Open the carton and lay out the components carefully, identifying them 
according to the parts list and diagram on pages 6 and 7.

Should any part be damaged or missing, please contact your Clarke dealer 
immediately for replacement.

Содержание CWB1250









Отзывы: