Clarke CUTS1, Руководство по сборке

Страница: 6 / 8

NOTE: Should the tool not have suitable holes for mounting to the table, then the
tool should firstly be mounted on to a suitable board of at least 15mm thickness,
and the board, with tool, secured to the table, again using the carriage bolt
provided.
5. The Extension Rails may be adjusted to suit the length of the workpiece, with
the work Roller Supports located in their brackets and adjusted to height as
required.
Additionally a WorkStop may be attached to a roller support, and adjusted for
height using two small knob screws provided.
The table extension together with the work stop may be positioned as required so
that stock lengths may be cut.
IMPORTANT.
Always ensure that before mounting a machine - Mitre Saw, etc., you take into
consideration the type of cuts and the size of the workpiece you will be working
with. Stability of the table is of paramount importance. Take extra care if/when
working with large or very long pieces, extra support may be required.
6
Turn foot so
that it lays flat
6