4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
20. Use appropriate safety equipment, such as protective footwear, when
using this jack.
21. When replacing parts, use only those supplied by Clarke International.
Refer to the parts list on page10.
22. Ensure that the jack is properly maintained, and lubricated at all times, and
that no rust or other forms of corrosion is allowed to weaken any part of it.
23. If the jack has been subjected to an abnormal load or shock, it should be
removed from service immediately and fully inspected by qualified
personnel, and passed as serviceable, before being used again.
24. When not in use, store the jack, fully lowered, in a safe, dry, childproof area.
IMPORTANT: ALWAYS ensure that the centre of gravity of the load, is centred
about the head section, before taking the full weight.
SAFETY SYMBOLS
The following safety symbols may be found on the product.
Wear foot protection
LIFTING
O
PERATIONS AND LIFTING EQUIPMENT
R
EGULATIONS 1998
This jack, depending on use, may fall within the scope of L
O
LE
R
. It is the
owner’s responsibility to determine whether or not it does and, if so, to comply
with any applicable requirements in L
O
LE
R
, for having the jack thoroughly
examined.
ENVIRONMENTAL PROTECTION
1. Take care to ensure that if hydraulic oil is spilt that it is cleaned away using
sand or treated with absorbent granules designed for the purpose.
2. Always make every effort to contain any spillage and prevent ingress into
the local water course.
