18
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
REPLACE CARBON BRUSHES
Your saw has externally accessible carbon brushes that should be checked
periodically for wear.
1. Using a flat blade screwdriver,
remove the top brush assembly
cap from the top of the motor.
2. Gently pry the brush assembly out
using a small screwdriver.
3. The second carbon brush can be
accessed through the access port
on the bottom of the motor.
Remove this in the same way.
• If either of the brushes are
shorter than 1/4 in. (6 mm), replace both brushes as a pair.
4. Make sure the brush cap is positioned correctly (straight). Tighten the
carbon brush cap using a hand screwdriver only. Do not overtighten.
SPECIFICATIONS
WARNING: TURN OFF AND UNPLUG THE SAW BEFORE CARRYING OUT ANY
MAINTENANCE WORK ON YOUR SCROLL SAW.
Model Number
CSS16VB
Rated Voltage (V)
230 V
Input Power
90 W
Throat Depth
406 mm
Max. Cut
50 mm
Stroke
15 mm
Speed
550 - 1600 strokes per minute
Table Size
415 x 255 mm
Table Tilt
0-45
o
Sound Power (L
wa
dB)
87.4 dB
Dimensions (L x W x H)
610 x 320 x 360 mm
Weight 10
kg
