10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
3. Place the blade and adaptors
into the gauge on top of the
machine to set the blade to the
proper length.
CUTTING AT RIGHT ANGLES TO THE UPPER ARM WHEN USING PINLESS BLADES
• Cutting from the side of the saw will be necessary when your workpiece
exceeds 405mm in length. With the blade positioned for side cutting the
table must always remain in the 0° bevel position.
1. Remove both set screws from each blade adaptor, thread them into the
opposite holes in the blade adaptor perpendicular to the adjustment pin.
BLADE TENSION
• Turning the blade tension knob
counterclockwise decreases
(slackens) blade tension.
• Turning the blade tension knob
clockwise increases (or
tightens) blade tension.
1. Pluck the back straight edge of
the blade while turning the
tension adjusting knob.
• The sound becomes higher pitched as tension increases.
NOTE:
Do not over-tension the blade. This will help to prolong the life of
the saw blade.
NOTE:
Too little tension may cause the blade to bend or break.
