2
SAFETY PRECAUTIONS
•
Never tamper with the pump. The safety valve is calibrated and sealed at the
factory, do not attempt to change these settings.
•
Use
ONLY
the recommended hydraulic oil.
•
Never use the pump for any purpose other than that for which it is designed.
•
Do not exceed the maximum working pressure. See Specifications
•
Use only Spare Parts supplied by Clarke International. The use of parts other
than those supplied by Clarke International could be hazardous, or cause
damage to the equipment, and will invalidate the guarantee.
Thank you for purchasing this CLARKE Hydraulic Spring Compressor.
This product is designed and constructed for use with all types of spring shock
absorber from 78mm to 182mm in diameter.
Please read this leaflet thoroughly and follow the instructions carefully, in doing so
you will ensure the safety of yourself and that of others around you, and you can
look forward to the unit giving you long and satisfactory service.
Please note that this manual is an integral part of the Spring Compressor and must
always accompany it, even in the event of sale.
CLARKE International shall not be held liable to any damage to persons or
equipment due to improper or non-permitted use of the unit.
Item
Description
Qty
Part No.
11
Rubber Handle
1
SNCSC100011
12
Handle
1
SNCSC100012
13
Actuator
1
SNCSC100013
14
Circlip
2
SNCSC100014
15
Pin
1
SNCSC100015
16
Pin
1
SNCSC100016
22
Oil Filter
1
SNCSC100022
23
Steel Ball
3
SNCSC100023
24
Coupler
1
SNCSC100024
25
Dust Cover
1
SNCSC100025
26
High Pressure Hose
1
SNCSC100026
27
Nut
1
SNCSC100027
28
O-Ring
1
SNCSC100028
29
Relief Valve Knob
1
SNCSC100029
31
O-Ring
1
SNCSC100031
32
Draw Rod
1
SNCSC100032
33
Oil Filter
1
SNCSC100033
34
O-Ring
1
SNCSC100034
35
Oil Reservoir
1
SNCSC100035
36
O-Ring
1
SNCSC100036
37
Valve Block
1
SNCSC100037
38
Oil Filler Screw
1
SNCSC100038
39
O-Ring
1
SNCSC100039
40
End Cover
1
SNCSC100040
41
Steel Ball
1
SNCSC100041
42
Steel Ball retainer
1
SNCSC100042
43
Adjuster Spring
1
SNCSC100043
44
Pressure Adjuster Screw
1
SNCSC100044
45
Stop Nut
1
SNCSC100045
46
Cover
1
SNCSC100046
47
Spring
1
SNCSC100047
48
O-Ring
1
SNCSC100048
52
Nut
1
SNCSC100052
53
O-Ring
1
SNCSC100053
54
O-ring
1
SNCSC100054
55
Plunger Seal
1
SNCSC100055
56
Plunger Housing
1
SNCSC100056
57
Plunger
1
SNCSC100057
59
O-Ring
1
SNCSC100059
Parts List- PUMP
7
GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period
of 12 months from the date of purchase. Please keep your receipt as
proof of purchase. This guarantee is invalid if the product is found to have
been abused or tampered with in any way, or not used for the purpose
for which it was intended.
Faulty goods should be returned to their place of purchase, no product
can be returned to us without prior permission.
This guarantee does not effect your statutory rights.
Capacity (Max. compressive tensiom) ................. 1650lbs
Max. Extension ......................................................... 260mm
Fully Retracted Dimension ...................................... 100mm
Rod Travel ................................................................. 100mm
Weight ....................................................................... 23kg
SPECIFICATIONS
