Clarke CR 28 Boost, Руководство по обслуживанию

Страница: 42 / 72

ENGLISH
40
Service Manual - CR 28 BOOST
®
DRIVE SYSTEM
DRIVE SYSTEM MOTOR, BEARING AND GASKET DISASSEMBLY/ASSEMBLY (Continues)
Remove.the.screws.(G),.then.remove.the.driving.wheel.assembly.(H).
At.the.workbench,.remove.the.electromagnetic.brake.(see.the.procedure.in.the.relevant.paragraph).
Remove.the.screws.(I),.then.remove.the.plate.(J).
With.a.puller.(K).remove.the.brush.side.bracket.(L).
Remove.the.mounting.screws.(M).of.the.driving.wheel.cover.(N)..Recover.the.nuts.(P).and.washers.(O).
Remove.the.cover.(N).from.the.reduction.unit.(Q).
If.necessary,.remove.the.screws.(S).and.the.fasteners.(T),.then.remove.the.bearing.(R);.if.necessary,.use.a.puller.
Remove.the.four.screws.(U),.then.remove.the.carbon.brushes.holder.assembly.(V).
If.necessary,.remove.the.bearing.(W).
With.a.puller.(K).remove.the.brush.side.bracket.(X).
If.necessary,.remove.the.screws.(Z).and.the.fasteners.(AA),.then.remove.the.bearing.(Y);.if.necessary,.use.a.puller.
Remove.the.motor.(AB).from.the.reduction.unit.(AC)..Do.not.let.the.oil.coming.out.of.the.hole.(AF)..Do.not.let.dust.and.dirt.
enter.the.reduction.unit.through.the.hole.(AF).
If.necessary,.remove.the.bearing.(AD).
If.necessary,.remove.the.oil.seal.(AE).
Assembly
Assemble.the.components.in.the.reverse.order.of.disassembly,.and.note.the.following:
the reduction unit spare part (AC) is already filled with oil (AGIP BLASIA 150; quantity 21 cl).
If.necessary,.use.a.rubber.mallet.to.install.the.cover.(N).
Tighten.the.screws.(M).at.141.61.lbf·in.(16.N·m;.1.63.kgf·m).
Tighten.the.screws.(I).at.194.71.lbf·in.(22.N·m;.2.24.kgf·m).
AH AI AG AI
H
AH
G
G
S301649
15.
16,
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
•
•
•
•