4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
2. Always ensure there is adequate ventilation. Do not spray or handle paint
in enclosed areas.
3. Never spray close to any source of heat or flame.
4. Always wear a suitable approved breathing mask when spraying, to
protect against inhalation of paint spray or fumes. An air fed mask may be
required when spraying some types of toxic paint. If in doubt, check with
the paint manufacturer.
5. Always check the manufacturer’s data sheets for the paint products being
sprayed for any particular hazards and follow the manufacturer’s
instructions. Take particular care if spraying isocyanate paints. Products
used in a spray gun may be covered by COSHH Regulations.
6. Always disconnect the spray gun from the air supply when it is not in use,
and before any disassembly.
7. Never spray paint towards people or animals.
8. In the case of injury, seek expert medical advice immediately.
Never
smoke while spraying or preparing paints, or spray near a naked flame,
heat source and electrical sparks. Many paints are flammable.
9. Never tamper with, or attempt to adjust the safety valve.
10. Never tamper with the product or modify it in any way, as this could prove
to be dangerous and will invalidate the guarantee. Only use the product
for the purpose for which it is intended.
11. When replacing parts, only use those supplied by Clarke International as
shown by the parts list on page 10.
